.png)
IKO self lubricated sliding bearing
- Category: Spherical Plain Bearing
- Description:The joint bearing is a kind of spherical sliding bearing Its sliding contact surface is an inner sphere and an...
- Email:admin@jngybearing.com
- TEL:+86 15165026537
- Company:Ji'nan Guang Yue Pml Precision Mechanism Ltd Of China
Details
Contact Us
The joint bearing is a kind of spherical sliding bearing. Its sliding contact surface is an inner sphere and an outer sphere. It can rotate and swing at any angle in motion. It is made of a variety of special processing methods, such as surface phosphating, frying, padding, spraying and so on. The joint bearing has the characteristics of large load capacity, impact resistance, corrosion resistance, wear resistance, self aligning and lubrication.
The joint bearing can bear a large load. According to its different type and structure, it can bear the combined load of radial load, axial load or radial and axial coexistence. Since the composite material is embedded on the outer spherical surface of the inner ring, the bearing can produce self lubrication in operation. It is generally used for low speed swinging motion and low speed rotation. It can also be tilted in a certain angle range. When the abutment axis and the axle housing hole are not concentric, they can still work normally. Self lubricating joint bearings are used in water conservancy, professional machinery and other industries.
Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, construction machinery, automation equipment, automotive shock absorber, water conservancy machinery and other industries. Spherical plain bearings are spherical bearings. The basic type consists of inner and outer rings with spherical sliding spherical contact surfaces. According to its structure and type, it can bear radial load, axial load, or radial load.
Because the spherical sliding contact area of the joint bearing is large and the inclined angle is large, but also because most joint bearings have taken special processing methods, such as surface phosphating, galvanizing, chromium plating or outer sliding surface lining, padding, spraying and so on, so it has great load capacity and impact resistance, and has corrosion resistance and wear resistance. Loss, self aligning, lubrication, or self lubrication, no dirt contamination, even if misplaced. Therefore, the joint bearings are widely used in low speed swing motion, tilt motion and rotation motion.
Rod end joint bearing
(1) SI... The E type is GE... The assembly of the E bearing and the end of the rod. Rod end with internal thread, material is carbon structural steel, no lubricating oil groove. It can bear radial load and any axial load less than or equal to 0.2 times radial load.
(2) SA... The E type is GE... The assembly of the E bearing and the end of the rod. The rod ends with external thread, the material is carbon structure steel; no oil tank, can withstand the radial load and any direction less than or equal to 0.2 times the radial load of the axial load.
(3) SI... The ES type is GE... The assembly of the ES bearing and the end of the rod. Rod end with internal thread, material is carbon structural steel, and lubricating oil groove. It can bear radial load and any axial load less than or equal to 0.2 times radial load.
(4) SA... The ES type is GE... The assembly of the ES bearing and the end of the rod. The rod ends have external thread, the material is carbon structural steel, and there are lubricating oil tanks. It can bear radial load and any axial load less than or equal to 0.2 times radial load.
(5) SIB... S type rod end with internal thread, material is carbon structural steel, inner ring is hardened bearing steel, and lubricating oil groove. It can bear radial load and any axial load less than or equal to 0.2 times radial load.
(6) SAB... S type rod end with external thread, material is carbon structural steel, inner ring is hardened bearing steel, and lubricating oil groove. It can bear radial load and any axial load less than or equal to 0.2 times radial load.
(7) SQ... It is ball end rod end joint bearing, rod end is carbon structural steel, ball head is carburizing steel. It can bear radial load and smaller axial load in any direction.
Self lubricating rod end joint bearing
(1) SI... The C type is CE... The assembly of the C bearing and the end of the rod. The rod ends with internal thread, and the material is carbon structure steel. A load that can bear the same direction. While bearing radial load, it can bear axial load of any direction less than or equal to 0.2 times radial load.
(2) SA... The C type is CE... The assembly of the C bearing and the end of the rod. The rod ends with external thread, and the material is carbon structure steel. A load that can bear the same direction. While bearing radial load, it can bear axial load of any direction less than or equal to 0.2 times radial load.
(3) SI... The CS-2Z type is GE... The assembly of the CS-2Z bearing and the end of the rod. The rod ends with internal thread, and the material is carbon structure steel. While bearing radial load, it can bear axial load of any direction less than or equal to 0.2 times radial load.
(4) SA... The CS-2Z type is GE... The assembly of the CS-2Z bearing and the end of the rod. The rod ends with external thread, and the material is carbon structure steel. A load that can bear the same direction. While bearing radial load, it can bear axial load of any direction less than or equal to 0.2 times radial load.
(5) SIB... Type C rod end thread with carbon structural steel, sintered bronze composite on the sliding surface, hardened bearing steel in the inner ring and hard chromium plating on the sliding surface. A radial load that can bear the same direction.
(6) SAB... The C type rod end outer thread is made of carbon structural steel, the sliding surface is sintered bronze composite material, the inner ring is hardened bearing steel, and the sliding surface is plated with hard chromium. A radial load that can bear the same direction.
(7) SIB... The F type rod ends with inner thread, the material is carbon structure steel, the sliding surface is glass fiber reinforced plastic with polytetrafluoroethylene as additive, the inner ring is hardened bearing steel, and the sliding surface is plated with hard chromium. A radial load that can bear the same direction.
(8) SAB... The F type rod ends with external thread, the material is carbon structure steel, the sliding surface is glass fiber reinforced plastic with polytetrafluoroethylene as additive, and the inner ring is hard chromium plating on the sliding surface of the hardened bearing steel. A radial load that can bear the same direction.
(9) SQ... Type L is made of special self lubricating alloy material, which can bear radial load and small axial load in any direction.
